13721-GREEN LACK WB TRAFFİC-2K
TWO-COMPONENT, ALIPHATIC POLYURETHANE RESIN-BASED WATER BASED PARQUET POLISH (GLOSSY-SATIN-MATTE)
DEFINITION: An aliphatic polyurethane resin-based, two-component, water-based, Nano-technology containing, high-resistant, bright, sateen and opaque varnish. It has been developed for indoor and outdoor spaces where there is dense pedestrian traffic. It provides splendid effect and hides all defects of the parquet. It has no toxic effect. It does not change the natural color of the parquets.
PLACE OF USE:It has been developed for indoor and outdoor spaces where there is dense pedestrian traffic.
• It rapidly dries out and provides a hard film.
• Does not distorting the natural appearance of the wood
• It has high scratch-resistance
• It is not toxic
• It is easy to clean
• It has high chemical resistance,
• It contains Nano-technology,
Surface Preparation: The application surface should be sound. The wooden surfaces should be cleared of the dusts on the surface and primed with cellulosic filler after the appropriate sanding process.
Ambient Conditions: The ambient temperature should be between +5 °C and +35 °C. Care should be taken to ventilation in the applications to be made in closed environments. The wooden surfaces should be cleared of the dusts on the surface after the appropriate sanding process. Cellulosic filler should not be used as primer especially in the outdoor applications.
Preparation of the Mixture: It is a two-component product and should be prepared at the specified mixture ratio as much as the amount to be consumed in consideration of the mixture life. In order to be able to obtain a homogeneous mixture, attention should be paid to that the product temperature is not less than 15 °C. The component A should be quickly mixed in itself with a mechanical mixer and the hardener (the component B) should be added by taking into account the mixture ratio. The component A and the component B should be mixed until they are homogeneous.
Ambient Conditions: The component A should be mixed in itself and hardener (the component B) should be added by taking into account the mixture ratio. The component A and the component B should be mixed until they are homogeneous.
Application onto the Surface: The varnish is slowly mixed with a clean stick. It is never shaken. It is applied onto the clean parquet floor, which has been levigated through the scraping process and tempered, as 2 layers with the water-based primer and as 3 layers without primer by means of a roller. The waiting period between the layers is 2-3 hours.
Cleaning of the Equipment: With hot water.
PACKAGING DETAILS One set of 5,5 lt GREEN LACK WB TRAFFIC-2K is composed of the component A of net 5 lt in a plastic gallon and the component B of net 0,5 lt in a plastic union.
PROTECT FROM FREEZING!