PRIMER VARNISH DESIGNED FOR ADHESION ONTO MELAMINE-PVC AND HARD SURFACES 10 + 1 (ALIPHATIC)
DEFINITION: Two-component, acrylic resin-based finishing varnish. Acrylic varnish gives a opaque appearance to the surface on which it is applied. Due to its acrylic structure, it forms a very transparent, hard, resilient film that does not turn yellow.
PLACE OF USE: It is designed to be used in varnishing all kinds of massive and coated wood surfaces in the furniture industry in the indoor furniture and decoration works which are required not to turn yellow.
• Ease of sanding
• High adhesion power
• Fast drying
• Resistant to yellowing
• Splendid pore filling feature
• Splendid hardness,
• Resistant to scratch and impact
Recommended painting system: 2-3 layers of 19000 Polyurethane filling varnish x 35 micron (dry film thickness). Other systems can be used as well depending on the application.
Surface preparation: The surface should be dry and clean. After the grinding process, the surface should be thoroughly cleared of the dust.
Application conditions: The ambient temperature should be between +5 ° C and +35 ° C. Good ventilation should be ensured for the coating to dry properly in closed areas.
Component A: 10 kg, Component B:1 kg
Component A: 2,5 kg, Component B: 0,25 kg
Storage: The product should be kept away from heat and fire sources in a dry, cool and well-ventilated area. The package should be tightly sealed.
Shelf life: The shelf life is 1 year in the sealed original container compound.
HEALTH / SAFETY INFORMATION
Before use, refer to the Material Safety Data Sheet (MSDS) prepared in accordance with the relevant EU directives.