POLYURETHANE SILK OPAQUE PANEL DOOR PAINT (4+1)
DEFINITION: Alkyd polyurethane resin based, two-component,silk opaque-appearance panel door paint.
PLACE OF USE: It is used in painting indoor wooden panel doors.
• It is hard and resilient,
• It is resistant to scratches and impacts,
• It is resistant to the splashes of domestic chemicals, fruit juices and alcoholic drinks,
• It provides a silk opaque appearance.
Note: The drying periods are the periods which will be obtained when applied so as to leave 40-micron dry film thickness in a single layer under the normal conditions. It should be known that the drying periods will increase as the application thickness increases and in cold weathers.
Surface Preparation: The application surface should be clean and solid, the surfaces onto which polyurethane primer is applied should be cleared of the dusts on the surface after the sanding process.
Ambient Conditions: The ambient temperature should be between +5°C and +35°C. For the applications to be made in the closed environments, attention should be paid to ventilation.
Preparation of the Mixture: It is a two-component product and it should be prepared at the rate of the mixture specified as much as the amount to be consumed by taking into account the mixture life. Attention should be paid that the product temperature is not less than 15°C in order to be able to obtain a homogeneous mixture. The component A should be mixed within itself and the hardener (the component B) should be added by paying attention to the mixture rate. The components A and B should be mixed until they are homogeneous. They should be brought to the application viscosity with Green Lack Polyurethane thinner. (16-18 sec. Dincup4)
Application onto the Surface: The mixture which is made ready for application is applied in two or three cross layers depending on the required surface saturity by pneumatic injection. It is left to curing in a dust-free environment.
Cleaning of the Equipment: With Polyurethane thinner.
PACKAGING DETAILS: One set of 20 kg 18501 POLYURETHANE OPAQUE PANEL DOOR PAINT is composed of the component A of net 16 kg and with the product code 18501 in one bucket and the component B of net 4 kg and with the product code of 18501 in one gallon.
STORAGE DETAILS: The material should be kept in a cool and dry place. The lifetime of the material is 1 year for the component A and 6 months for the component B when it is stored in its unopened original package and properly.