17301-GREEN LACK
CELLULOSIC FINISHING PAINT (BRIGHT)

DEFINITION: Alkyd and Nitro cellulose based, single-component, air-dried, bright, cellulosic finishing paint.

PLACE OF USE: It is suitable for use on the wood, sheet and polyester surfaces for internal use.

ADVANTAGES:

• Quick drying,
• Resistance to domestic chemicals, fruit juices and alcoholic drinks,
• Perfect brightness.

Note: The drying periods are the periods which will be obtained when applied so as to leave 40-micron dry film thickness in a single layer under the normal conditions. It should be known that the drying periods will increase as the application thickness increases and in cold weathers.

APPLICATION DETAILS

Surface Preparation: The application surface should be clean and solid. The surfaces which are primed with the appropriate primer should be cleared of the dusts on the surface after the sanding process.

Ambient Conditions: The ambient temperature should be between +5°C and +35°C. For the applications to be made in the closed environments, attention should be paid to ventilation.

Preparation of the Mixture: Attention should be paid that the paint to be thinned is at minimum 15°C. It should be brought to the application viscosity with the addition of Green Lack Cellulosic Thinner and homogeneous mixture should be ensured also by using mechanical mixer when required.

Application onto the Surface: The mixture which is made ready for application should be applied in the form of two – three cross layers by waiting for 20-30 minutes between the layers depending on the required surface saturity by pneumatic injection. In the necessary cases, pasta-polish process can be applied 1 day after.

Cleaning of the Equipment: With cellulosic thinner.

PACKAGING DETAILS:Available as net 12 kg in one bucket, as net 2,5 kg in one gallon and as net 0,75 kg in one box.

STORAGE DETAILS: The material should be kept in a cool and dry place. The lifetime of the material is 1 year when stored in its unopened original package and properly.

HEALTH/SAFETY DETAILS: Comply with the Safety Information Form (SIF) issued in compliance with the EU directives related to the product.