info@innovapolimer.com +90 262 751 4311 Monday - Saturday , 08:30 - 18:00

13501-GREEN LACK
CELLULOSIC BASED TRANSPARENT MIDDLE LAYER COLORANT

DEFINITION: Alkyd and Nitro cellulose based, single-component, air-dried, transparent cellulosic middle layer coloring paint.

PLACE OF USE: It is applied onto the cellulosic or polyurethane filling varnishes as the middle layer colorant in all kinds of wooden furniture for internal use.

ADVANTAGES:

• Quick Drying,
• Decorative surface appearance,
• Healing capability,
• High color severity.

Note: The drying periods are the periods which will be obtained when applied so as to leave 25-micron dry film thickness in a single layer under the normal conditions. It should be known that the drying periods will increase as the application thickness increases and in cold weathers.

APPLICATION DETAILS

Surface Preparation: The application surface should be clean and solid. The surfaces onto which the polyurethane or Cellulosic filling varnish is applied should be cleared of the dusts on the surface after the proper sanding process.

Ambient Conditions: The ambient temperature should be between +5°C and +35°C. For the applications to be made in the closed environments, attention should be paid to ventilation.

Preparation of the Mixture: Attention should be paid that the paint to be thinned is at minimum 15°C. It should be brought to the application viscosity with the addition of Green Lack Cellulosic Thinner and homogeneous mixture should be ensured also by using mechanical mixer when required.

Application onto the Surface: The Transparent Paint is thinned with thinner at the rate of 40-50% and applied onto the surfaces on which the filling varnish is applied by spraying method. Attention should be paid that the application is in the form of two-three cross layers depending on the required color tone. After waiting for at least 6 hours, it is sanded with the sandpaper no 360-600 and Green Lack Cellulosic, Polyurethane or Acrylic finishing varnishes are applied as per the request. When required, it can be applied also by being added into the finishing varnishes after being thinned with the cellulosic thinner.

Cleaning of the Equipment: With cellulosic thinner.

STORAGE DETAILS: It is available as net 12 kg in one bucket and as net 2,5 kg in one gallon, as net 0,75 lt in one package.

HEALTH/SAFETY DETAILS: Comply with the Safety Information Form (SIF) issued in compliance with the EU directives related to the product.


×

Green Lack
Welcome to our WhatsApp helpline.

Live Support|Green Lack