info@innovapolimer.com +90 262 751 4311 Monday - Saturday , 08:30 - 18:00

11501-GREEN LACK
POLYURETHANE FILLING VARNISH (2+1)

DEFINITION: Alkyd polyurethane resin based, two-component, opaque appearance, polyurethane filling varnish for furnitures.

PLACE OF USE: It is used as filling varnish on all kinds of massive and coated wood surfaces for internal use in the furniture and decoration industry

ADVANTAGES:

• Easy sanding
• Filling power is high.

Note: The drying periods are the periods which will be obtained when applied so as to leave 40-micron dry film thickness in a single layer under the normal conditions. It should be known that the drying periods will increase as the application thickness increases and in cold weathers.

APPLICATION DETAILS

Surface Preparation: The application surface should be clean and solid. The wood surfaces should be cleared of the dusts on the surface after the proper sanding process.

Ambient Conditions: The ambient temperature should be between +5°C and +35°C. For the applications to be made in the closed environments, attention should be paid to ventilation.

Preparation of the Mixture: Attention should be paid that the paint to be thinned is at minimum 15°C. It should be brought to the application viscosity with the addition of Green Lack Cellulosic Thinner and homogeneous mixture should be ensured also by using mechanical mixer when required. It should be rested for 10-15 minutes before the application is started.

Application onto the Surface: The mixture which is made ready for application is applied in two or three cross layers depending on the required surface saturity by pneumatic injection. It is left to curing in a dust-free environment.

Cleaning of the Equipment: With Cellulosic thinner.

PACKAGING DETAILS: One set of 18 kg 11501 POLYURETHANE FILLING VARNISH is composed of the component A of net 12 kg and with the product code 11501 in one bucket and the componentB of net 6 kg and with the product code of 11501 in one gallon.

STORAGE DETAILS: The material should be kept in a cool and dry place. The lifetime of the material is 1 year for the component A and 6 months for the component B when it is stored in its unopened original package and properly.


×

Green Lack
Welcome to our WhatsApp helpline.

Live Support|Green Lack